2020 Hargrave 92' _{(28.04 m)} Sky Lounge

HERE ARE JUST A FEW OF THE UPGRADES AND FEATURES OF "G-G" YOU SHOULD BE AWARE OF:

As a clean-sheet build, this C-92 includes the following features unavailable or only as options on the competition:

1.      Built to RINA Pleasure Class—Unrestricted. Included inspections of structural and system plans and throughout the build process to assure integrity and safety. Example: includes 3 full fire standpipes and stations. The result includes most plumbing is by hard piping (not hoses) for integrity, maintenance, and access.

2.      On Deck Master with full His and Hers Heads with heated floors (as in VIP) and upsized shower. Full beam includes oversized windows, ample closets and storage, seating, and skylight.

3.      3 Staterooms below, two sized as VIP’s, plus separate laundry and exercise (including equipment in place) rooms.

4.      Naiad At-Rest stabilization. Side-Power bow and stern thrusters.

5.      Extended length Pilot House to include a full lounge and office use and aft outside covered dining.

6.      Power cords 100AMP x 2 at BOTH stern and at the bow with Glendenning’s to assure most proximate connection.

7.      Air conditioning custom-designed to outlet hidden and without direct air onto guests at soffits.

8.      Boarding gate BOTH at stern and midship to assure access on shorter docks.

9.      Full wing stations with controls at both port and starboard to assure full, unobstructed visibility for docking. Also Hardwired plug-in controls if needed for aft visibility.

10.  Engine room finishes upgrade includes air conditioning, upgraded MTU computer monitoring, scanning camera monitor.

11.  Upgraded Pilot House electronics design includes five 22” monitors, full Garmin equipment plus 72 mi Furuno radar, FLIR and 5G Pep Wave.

12.  Beach club – full beam and at water level includes bar and kitchenette, TV and lounge and half bath with hydraulic swim platform extension for swimming and outside lounging. Prepped for the addition of a dinghy if desired. Is accessible directly from crew quarters to give crew full interior private lounge area when not in use by guests.

13.  Foredeck lounge area includes seating, cocktail table, sun pads, and umbrella covering with pop-up lighting for evening hors d’oeuvres.

14.  Dometic water system including filtration treatment of all water---avoids the need for separate filters or external spot zero.

15. Custom-designed, selected, and upgraded woodwork and material inset panels and wallcoverings and fixtures assure this will be a one-off!

HOW THIS YACHT CAME TO BE

Last week someone asked the owner why he built with Hargrave and we thought his answer really summed it up:

"After considering a build with Horizon, OA and Benetti we knew what we wanted. We were disappointed that the design and systems changes and upgrades we wanted, including a build to class, were not available. Hargrave's new facility offered European craftsmanship and assurances that were worth the extra cost."

This Hargrave owner made a number of significant refinements that you will recognize on your first visit. On the exterior alone you’ll quickly notice the shaping, styling, and paint styling are all a level above the competition. Working with Fort Lauderdale-based Yacht Interiors by Shelley, they both took full advantage of the yard's skilled craftsmen and the level of detail in the fabrication, construction, hardware, cabinetry, and even the functional details like the arrangement plan, are all top-shelf custom construction examples. The yacht is also fully certified by the RINA Classification Society. 

(We understand buyers today look at a listing online for 90 seconds or less and most just want to see the photos and videos ASAP. If you are interested in this yacht we have a full set of interior specifications showing all marble, granite, wood, fabric, as well as all the equipment installed onboard. It is available on request.)

Buying a custom yacht is the equivalent of owning an original artwork while buying a luxury production boat is more like a numbered copy. This special and totally custom yacht is a rare offering from Hargrave and we are excited to present it to you now.

BASIC ARRANGEMENT

Configuration - This is a three-deck sky lounge configured yacht built on a semi-displacement Jack Sarin hull form and carrying 5,000 gallons of fuel so you can really explore some new places with her 2,000-mile range.

Accommodations – There is a master suite on deck with his and her bath, while below there are three full guest suites – 2 have VIP queen berths and one is a twin berth cabin that can be converted to a VIP queen berth. In addition, there is a separate exercise room and a laundry center forward on the cabin deck level and two additional cabins aft that can be used as either crew or for guests if you are an owner-operator.

Key Equipment - The yacht is equipped with a full handling package from Naiad Dynamics of At Rest stabilizers with Datum Controls, as well as both bow and stern thrusters. She has a pair of Northern Lights 38 kW generators to handle all electrical loads, 5 blade Nibral performance propellers mounted on 4” Aquamet shafts, and all hooked up to ZF 2250 transmissions at 3:1 ratio, and a pair of MTU 1600 hp engines.

UPPER BRIDGE DECK

Access - You can access the upper bridge deck three ways – immediately upon boarding the aft deck there is a staircase on the port side leading up. When you are walking forward on the side decks there are staircases port and starboard leading up. There is a set of interior stairs leading to the sky lounge on the starboard side in the galley.

Exterior Layout – There is a large U-shaped lounge outdoor seating area forward of the helm station with cocktail tables as well as a nice sun pad area. There is a second outdoor seating area aft of the pilothouse as well as a stand-up bar with stools that includes a sink, wine cooler, icemaker, and storage.

Pilothouse - Includes a private head on the port side and a large sofa lounge on the starboard side. A custom owner's desk is forward on the port side, and forward of that is the helm station which is well laid out and includes three Stidd helm chairs. Complete details on electronics and audio-visual equipment are shown below in this listing.

MAIN DECK & AFT DECK

Master Cabin Suite – All the way forward is the master suite which includes a king-sized berth, his and her bath with shower, a seating area on the starboard side, and lots of storage space including 10’ of hanging locker space!

Galley – The galley is designed so it can either open to the salon for casual entertaining or closed for more formal service. There is a large double door refrigerator as well as extra refrigeration drawers, a full pantry, dishwasher. (Note - an additional full freezer is located on the bridge deck.)

Dining Area – Located directly aft of the galley it can easily handle eight guests for meals and be serviced from both the port and starboard side of the well-equipped galley.

Main Salon – A relaxed and comfortable ambiance was designed into this space with settees and lounge chairs, and lots of natural lighting from her oversized floor-to-ceiling windows. There is a head on the starboard side in the aft section and a full audio-visual entertainment center as well.

The Aft Deck – When you step out of the salon onto the aft deck you’ll find a unique and attractive seating area configured for today’s type of entertaining. When you look at the photos the bar is actually designed to have active interaction with guests in the seating area.

From the aft deck, you have boarding gates on the port and starboard side, there is a staircase leading up to the bridge deck as well as down to the crew area and engine room, and there is a staircase on the starboard side leading down to the oversized swim platform which can be lowered into the water.

LOWER CABIN DECK

VIP Berth Cabin – Located all the way forward with a king on the centerline and full bath, two hanging lockers, and plenty of storage and drawer space.

Fitness Center – The owner has included a separate cabin for a fitness center on the port side.

Laundry Center – There is a laundry center on the starboard side with sink and linen storage etc.

Port VIP Twin Berth Cabin – The twin bed cabin is on the port side and the bunks can slide together to make a queen berth with a full head, hanging locker, drawers.

Stb. VIP Queen Berth Cabin – Located on the starboard side with full head facilities, hanging locker, drawers.

ENGINE COMPARTMENT

The engine room is well laid out and designed for ease of service. All of the mechanical equipment and systems are detailed elsewhere in this presentation.

CREW AREA

There is a twin berth cabin on the port side and a single cabin (with pilot berth above) on the starboard side along with the full head and shower.

BEACH CLUB & SWIM DECK

The large beach club features a half bath on the port side, a fully equipped stand-up bar with stools, and a u-shaped lounge on the starboard side. The beach club can be directly accessed from and become part of the crew area. This area also serves as a crew lounge at night and the settee converts to an additional berth. There is an access door plus the entire stern aft panel can be lifted into the air or there is an access door mounted in the center of the panel. The swim platform is hydraulic and can be lowered into the water.

KEY SPECIFICATIONS

Principle Dimensions (approximate):

LOA 91’ 10”

LWL 78’

Beam 23’ 3”

Draft (half load) 5’ 7”

Height (Half load WL to top of arch) 31’ 10”

Displacement (half load) 209,440

Fuel 5,000 gal

Fresh Water 700 gallons

Engine Twin MTU 10V2000M96

Generator 38 kW Northern Lights

A.   Hull and Main Structure

.

I .1.1         GRP Materials Specification

I.1.1.1          Resin

a)    The resin is epoxy and approved by both the reinforcement fabric supplier and RINA. 

b)    The resin will be able to withstand temperatures of up to 60^oC without distortion and resin migration. 

c)    The resin manufacturer’s requirements and instructions will be strictly adhered to.

d)    The resin used for the construction of the yacht will be GURIT, which is RINA approved.

e)    Hardeners used will be GURIT (slow hardening).

I.1.1.2          Cores

a)    The Cores are cross-linked PVC (AIREX).

b)    Closed-cell low-density polyurethane “flotation“ foam shapes can be used to shape all frames girders and stiffeners. 

c)    An exception is made for the engine foundations where, in order to provide sufficient mass for maximum absorption of engine vibration, the core material shall be a solid laminate of marine plywood or other material specified by the Architect and/or Structural Engineers.

d) High-density foam or Balsa shall be substituted in areas of high loading and in way of bolted-on hardware.

e)    Cores to be stored in an area of controlled humidity.

f)     Foam to be purchased with outgassing certificate and manufacturers processing instructions, particularly with regard to foam priming to be adhered to at all times.

g)    The selection of the cores will be based on the particular application, and in part on the builder’s preference, with the approval of the Architect. 

h)    The selection of core bond mixture will be left to the Builder but will be approved by the Structural Engineers prior to construction.

I.1.1.3          Fabrics

a)    All reinforcement fabrics will be supplied by a RINA-approved manufacturer and by the Builder and Architect. The primary reinforcement material will be E-glass.

b)    Orthotropic E-glass laminates will have the following minimum properties:

·      Tensile Strength               21,000 Psi

·      Tensile Modulus               1.50 x 10⁶ Psi

·      Compressive Strength     21,000 Psi

·      Compressive Modulus      1.50 x 10⁶ Psi

·      Expected glass contents are:           

                     52% for vacuum bagged panels (decks and bulkheads)

                     50% for molded components (hull, superstructure girders, and beams)

                            48% for secondary bonding and stringers

a)    The fibers will be E-Glass and Carbon fiber for re-enforcements.

I.1.1.4          Peel Ply

a)    Nylon peel-ply fabrics shall be applied:

·      to all surfaces which shall require secondary bonding;

·      to all laminates when the period up to the application of the next layer will exceed 48 hours;

·      to all exterior surfaces.

1        The resin is epoxy and will be approved by the reinforcement fabric supplier and RINA

2        The resin will be able to withstand temperatures up to 60 degrees C without distortion and resin migration.

3        The resin manufacturer’s requirements and instructions will be strictly adhered to.

4        The resin used for the construction of the yacht will be Type approved.

5        The Cores are cross-linked PVC

6        Closed-cell low-density polyurethane “flotation” foam shapes can be used to frames girders and stiffeners.

7        An exception is made for the engine foundations where, in order to provide sufficient mass for the maximum absorption of

engine vibration, the core material shall be a solid laminate of marine plywood or other material specified by the Architect

and/or Structural Engineers.

8        All reinforcement fabrics will be supplied by a mutually agreed upon manufacturer by the Builder and Architect. The

primary reinforcement material will be E-glass.

9        Orthotropic E-glass laminates will have the following minimum properties:

Tensile Strength            21,000 Psi

Tensile Modules           1.50x10⁶ Psi

Compressive Strength  21,000 Psi

Compressive Modulus  1.50 x10⁶ Psi

Expected glass contents are:

          52% for vacuum bagged panels (decks and bulkheads)

          50% for molded components (hull, superstructure girders, and beams)

          48% for secondary bonding and stringers

   10   The fibers will be E-Glass and eventually Carbon fiber for re-enforcements

   11   Exterior paint Alwcraft

B.    Exterior Deck and Equipment

1        Teak aft deck, teak swim platform and teak steps to swim platform and steps to the upper deck and side walkway Non-skid for the rest

2        FRP cap rail

3        Maxwell VWC3500 vertical hydraulic anchor winch (x2) w/local foot switches and remote and chain counter

4        285 ft high tensile ½’ anchor chain (x2)

5        100Kg S/S anchor (x2)

6        S/S rollers and chain stopper

7        Heavy duty 316 S/S Cleats and fairlead w/rollers

8        Aft deck corner hawser (x2) towing 12000lbs

9        Bulwarks w/flush mounted courtesy lights

10    Bulwark side doors (x4) at aft deck for boarding and midship

11    Freshwater/seawater anchor chain wash down the system by manual operation

12    2" handrail with 1-1/2” S/S stanchions and steel cable around the entire boat

13    S/S/ flag pole at the bow

14    Standard docking lines

15    Portuguese bridge with sofa seats and lounge tables as per layout

16    Foredeck sunbathing cushion w/drink holders

17    Frameless windows, clear tempered laminated Low-E glass for windshield

18    Frameless windows, tined tempered laminated glass for side windows

19    Stairs from the aft deck to swim platform with S/S gate doors and handrails

20    S/S Sliding saloon entrance door, self-locking auto door sky lounge and aft deck with a kick button

21    Deckhouse side entrance door (x2) one sliding door on the starboard side and one hinged door from the galley on the port

side walkway

22    Aft dining table

23    Integrated stairs from the aft deck to the upper deck (one for port side)

24    Hydraulic Hi/Lo swim platform with function as tender lift up to max 2000 lbs removable chalks for swim platform tender

25    Two pop-up cleats on hi/lo swim platform.

26    Boathook

27    Built-in shower with hot/cold water above the swim platform.

28    One extractable swim ladder

29    Rub rail around hull sides

30    Portholes are all glass

31    Exterior LED step lights

32    Removable corner rails on the swim platform

33    Sail track

Beach Club:

35    Hydraulic door with pantograph door in the middle

36    Sofa seat w/table as per layout

37    Bar with S/S bar stools, sink, Isotherm 2 drawer refrigerator and cooktop

C.    Skylounge and Boat Deck Skylounge

1        Helm station (as the main station)

2        Choice of marble/Corian/Teak for countertop

3        L-shaped seats w/table as per layout

4        Custom two-level bar, sink, refrigerator, and wine cooler

5        Sliding door to the boat deck with self-lock.

6       Hatch (x1) on hardtop with a (ship loose) retractable ladder

7       Sun awing aft of sky lounge with SS supports

8       Fwd umbrella

Boat Deck/UpperDeck:

9      Non-skid upper deck

10    Boat deck furnishings

11    Sunbrella fabrics for exterior cushions

12    Sunbrella canvas covers for the upper deck furniture, aft deck seat, windshield, sun pad, and foredeck cushion, and seat

13    Countertop per designer

14    Integral S/S handrails around exterior FRP cabinet

15    One 30” fire magic barbecue in custom cabinet per layout no flip cover

16    Oversize drains with strainers on each corner of the upper deck and internal overboard drains

17    Radar arch w/antenna brackets

18    N/A

19    Kallenberg air horns on top of the radar arch

20    S/S flag pole at stern

21    N/A

22    LED blue lights for H logo on port & starboard side

D.   Pilothouse and Instrument

1   Stidd pilot chair (x3, manual)

2   Integrated instrument panel on helm station, standard choices of wood and leather

3    layout per plan

4   Heavy-duty Speich S/S wipers w/wiper wash system

5   Variable speed control on each windshield wiper

6   Danforth or equivalent magnetic compass at helm

7   International LED navigation lights

8   Full set of engine gauges at helm

9   Electric fuel and water level gauges

10 Monitoring system for importation equipment (bilge pumps, blowers, navigation lights)

11 Surveillance camera system (PTZ cameras at aft deck and engine room)

12    DC12V receptacle

13    Chart storage if space allowed

E.    Engine Propulsion and Steering System

1      Twin MTU 10V2000M96 engines (gauges manual in e/r and chrome mounts for cameras)

2      S/S shafts Aqualoy 22 HS or equivalent

3      High performance S class 5 blade propellers in NiAlBr

4      Main and intermediate bronze struts with backing plates

5      Shaft and rudder packing glands with Tides Marine dripless seals or equivalent

6      MTU engine controls at helm station

7      One remote handheld control plug-in type

8      Jastrom power steering system

9      S/S rudder w/zinc plates

10    S/S emergency steering wheel in rudder cabin

11    Custom steering wheel at helm station

12   Underwater exhaust system for engines w/bypass mufflers

13    NAIAD zero speed stabilizer

14   NAIAD hydraulic bow (45HP) and stern thrusters (65HP)

15   Humphries Interceptor trim system.

16    Anti-noise treatment to the exhaust system

17    Air handler in E/r

Engine room and Equipment:

1        Engine room clean designed with powder-coated decks

2        Heavy-duty insulated engine room door

3        S/S overhead grab rail on each side of the engine

4        Engine room LED ceiling lights

5        Engine compartment ventilation blowers

6        Delta T engine room de-misters

7        Engine load distributed through flexible mountings on S/S engine bed bonded to FRP hull girder

8        Engine alarm system as per engine standard

F.     Electrical Systems

General Description:

1        Color-coded wiring for easy identification

2        Main electric panel includes AC & DC circuit breakers

3        24 volt DC monitoring and main circuit breaker panel

4        Subpanel design in each zone for electrical distribution

5        Emergency power package & lighting system

6        AC volt receptacles located throughout including the engine room

7        GFI protection for all AC outlets in exterior, heads, galley, and engine room

8        Fiberglass water/exhaust separator for generator

9        Electrolysis bonding system

10    Cathodic protection with zinc anodes for shafts, struts, etc

11    Indirect lighting under valance in salon, staterooms, sky lounge, and galley

12    Dimmer system for LED-ceiling lights in the aft deck and sky lounge

13    Dimmer system for LED ceiling lights in the salon, master, and VIP staterooms

14    Italian Vimar switches for the lighting system

15    Underwater lights (x 8)

16    stern docking lights and flood light boat deck

AC/DC Main Power System:

17    Northern Lights generators (x2) 38 kW (60Hz) with sound shields

18    255 Ah AGM start batteries (x4) for engines/generators with battery chargers (x2)

19    210 Ah AGM batteries (x8) for ship’s DC 24v service power with combined inverter-chargers (x2)

20    210 Ah emergency batteries (x2) above main deck w/independent battery charger (x1)

21    All batteries enclosed with proper fixtures

22    Vapor proof battery switch

23    Power distribution system

Shore Power System:

25    4x Glendinning 100 Amp shore power Cablemasters each w/125’ power cable (2 Forward 2 aft)

26    Shore power connection w/100 Amp ISO boost transformers which will be wired as a polarization transformer

27    N/A

28    N/A

Navigation System: (Custom designed 5 screen display)

29    Garmin GPS

30    Furuno 72” 12kW 72nm open array radar system

31    Garmin 24” (x 5 units) multifunction displays screens

32    Garmin fish finder and chirp transducer

33    Garmin Autopilot system

34    Garmin wind/speed/depth/temp transducers

35    Garmin VHF (2)

36    Garmin AIS

37    (4) 22" Garmin 8622 mfd screens plus 5th screen ship service unit

38    Pepwave 5-G wifi

39    EPIRB (2)

40 F.L.I.R.

41    (2) 12 man lift rafts

H. Mechanical Systems

Fuel Oil System:

 1   Fuel tanks w/ sight & electric gauges and capacity specified in Principal Dimension above

 2   Dual Racor 75/1000 MA fuel filters/water separator, each engine

 3   Electric fuel transfer pumps (x2)

 4   Racor 500 MA fuel filters (x2) one on each generator

 5  Reverso oil change pump system for engines, gears, and generators

 6   Reverso FPS210 fuel polishing system (x1)

Fresh Water System:

7    FRP water tank with a capacity specified in Principle Dimension above

8    Watermaker 2,000 GPD by Dometic

9    High volume Headhunter AC freshwater pressure pump 2 and one DC pump for back up

10  N/A

11  Freshwater hose for filling engine and generator expansion tank

12 PVC piping for freshwater system

13  40 gallon water heaters (x2)

14  Hot water circulation pump (x2)

Sanitary System:

15     Headhunter toilet system

16     600 gallon holding tank w/macerator pump and 500 gallon per day Headhunter waste

        treatment system

17     Y-Valve for holding tank with deck fitting for dockside pump-out

18     500 gallon sump tank

19     Sump pumps system for grey water tank

20     Electric level indicators for 600 holding tank

Bilge Water System:

21     Electric Rule bilge pump (x5)

22     110 volt bilge pumps (x2) crew area, 2 in the engine room and 1 in the forward VIP

23     High water level bilge alarm

24     N/A

25     All bilges dry and Awlgrip painted

AirConditioning System:

25  Cruise Air chilled water air conditioning system and makeup air for lower deck

26  N/A

27  Air handlers throughout the boat

28 N/A

Fire Safety System:

29  Fire insulation in the engine room

30  Fire resistant treatment for pipe penetrations

31  Fixed fire extinguisher by NOVEC for engine room with remote control

32  Auto shutdown system

33  Automatic fire damper system

34  Portable fire extinguishers (x8) in recessed lockers

41    Integrated fire alarm system in the sky lounge with heat or smoke detector in each cabin

Appliances:

38    Undercounter ice maker, refrigerator per layout

39    Wine cooler per layout

40    S/S Sink per layout

41    Garbage disposal

42    Refrigerator (x2)

43    Induction cooktop with exhaust blower above

44    Dishwasher

45    Microwave and oven or one microwave-oven

46    Trash compactor

47    stacked washer/dryer (x2)

48    all appliance to be Meili

Television Package and Stereo System

TV screens located in master suite, three guest suites, exercise room, crew cabins, beach club, aft deck, galley, and sky lounge.

49    TV antenna on top of the radar arch and dummy doom

50    WiFi booster system with wireless routers onboard

51    Skylounge 55” LED TV with Fusion Marine Stereo (x1) and speakers (x2)

52    Upper deck Fusion Marine Stereo Amplifier and speakers (x2) from sky lounge Fusion Stereo

53    Salon 55” LED TV with Bose lifestyle home entertainment system and separate Blu-Ray disc player and Apple TV

54    Aft deck Fusion Marine Stereo (x1) and speakers (x2)

55    Master stateroom 50” LED TV with Bose lifestyle home entertainment system and separate

        Blu-Ray disc player and Apple TV

56    VIP stateroom 40” LED TV with Fusion Marine Stereo (x1) and SM speakers (x2)

57    Guest stateroom 32” LED TV with Fusion Marine System (x1) and SM speakers (x2)

58    Crew mess 32” LED TV with Fusion Marine Stereo (x1) and SM speakers (x2)

59    wireless intercom system

60    Exterior connector for shore power and cable tv

61    Aft deck TV 50"

Misc Equipment

2 aft deck capstans

**All specifications subject verification at the time of sale. (Certain changes were made during the build process.)**

** Priced reduced for an offer signed and accepted during the month of May and is $2.0 million less than the current replacement.

** EXCLUSIONS** The name "G-G" is reserved, the owner's personal artwork and certain personal effects are not included in the sale. A list will be supplied at the time of offer.

Listing MLS by Yachtr.com